Pipe Characteristics
Microtunneling pipe should meet the following general requirements: Circular shape with a flush outside surface (including at the joints); Strength sufficient to withstand both the installation...

Pipe Design
The pipes and joints, once installed, must be capable of safely withstanding, for the project design life, all in-use service loads, including those associated with the following factors:...

Field Aspects
As soon as practical after their arrival at the project site, all pipes, fittings, and appurtenances should be thoroughly checked for compliance with the contract documents and accepted...

Performance of Suction Caissons in Sand and Clay
The use of suction caissons (suction piles) in marine environments has been increasing in the last decade. A suction caisson is a steel pipe with an open bottom and a closed top that is...

Shear and Interface Strength of Clay at Very Low Effective Stress
Thin-specimen direct shear (TSDS) tests were conducted to measure the shearing strength of kaolinite, and interface strengths between kaolinite and acrylic plastic and anodized aluminum,...

Advanced Fracture Control Procedures for Deepwater Platforms and Compliant Towers
This paper describes an integrated approach to fracture control problems � applied first as a necessary adjunct to the authors' own engineering practice, then in developing...

Sustainability and Resiliency Implications of Hurricane Sandy
Hurricane Sandy provides a unique opportunity to study sustainability and resiliency issues related to a major weather event. The material presented in this article is based on the Geo-Engineering...

Geo-Hubei 2014 244-255
Sustainable Civil Infrastructure, Innovative Technologies and Materials
Selected papers from the proceedings of the Geo-Hubei 2014 International Conference on Sustainable Civil Infrastructure, held in Yichang, Hubei, China, July 20-22, 2014. Sponsored by the...

Raise the Bar for Engineering - Extended Version
Promotional material for the Raise the Bar initiative, which seeks to require future professional engineers to obtain a Master's degree in engineering or an equivalent30 credit...

Journal of Hazardous, Toxic, and Radioactive Waste
The Journal of Hazardous, Toxic, and Radioactive Waste publishes articles relating to the allied engineering and scientific disciplines involved in the environmental aspects of the management of hazardous,...

Journal of Nanomechanics and Micromechanics
The Journal of Nanomechanics and Micromechanics brings science and applications together on nanoscale and nanostructured materials, with emphasis on mechanics, processing, characterization, design, modeling,...

Building Code Requirements and Specification for Masonry Structures
Containing Building Code Requirements for Masonry Structures (TMS 402-11/ACI 530-11/ASCE 5-11), and Specification for Masonry Structures TMS 402-11/ACI 530-11/ASCE 6-11), and Companion Commentaries
Building Code Requirements and Specification for Masonry Structures contains two standards and their commentaries: Building Code Requirements for Masonry Structures (TMS 402-11/ACI 530-11/ASCE...

Existing Sewer Evaluation and Rehabilitation
Fully revised and updated, this authoritative volume offers the most comprehensive information available on maintenance, repair, rehabilitation, and replacement of existing sewers. This...

Slope Effect on House Shrink-Swell Movements
(Originally published in Journal of the Geotechnical Engineering Division, 1980, 106(12), 1327-1344.)...

Simulating Radionuclide Transport Away from an Underground Nuclear Test: Linking Non-Isothermal Flow and Mechanistic Reactive Transport
The low-yield (0.75 kiloton) Cambric underground nuclear test situated in alluvium below the water table offers unique perspectives on radionuclide transport in groundwater. The Cambric...

Coupling Physical, Chemical, or Biological Methods for Innovative Groundwater Remediation Coupled Polymer Floods and Bio-Chemical Remediation Techniques for Enhanced Groundwater Treatment
Many groundwater remediation techniques are designed to remove or destroy contaminants in situ, but these goals can be accomplished only by...

Hydrologic Comparison of Four Types of Permeable Pavement and Standard Asphalt in Eastern North Carolina
A permeable pavement parking lot in eastern North Carolina consisting of four types of permeable pavement and standard asphalt was monitored from June 2006 to July 2007 for hydrologic...

Size and Scale Effects on the Shear Strength of Concrete Beams
This paper identifies and discusses the role of proper geometric scale of relevant parameters in the size effect in shear, particularly in terms of practical beam design. In the overall...

2008 Civil Engineering Industry Buyer' Guide
A Special Supplement to Civil Engineering Magazine
This guide covers the following topics: Construction materials; Geotechnical and environmental; Information technology; Pipelines, sewers, and accessories; Professional and professional...

Introduction: Disaster Risk Assessment and Mitigation
This introductory chapter covers the origins of this monograph as a sequel to two previous monographs generated by the efforts of the members of ASCE CDRM and other volunteers; an overview...

 

 

 

 

Return to search